Transmission Rate Research Articles

Vector competence of Swedish Culex pipiens mosquitoes for Japanese encephalitis virus

BackgroundJapanese encephalitis virus (JEV) is an emerging mosquito-borne Orthoflavivirus that poses a significant public health risk in many temperate and tropical regions in Asia. Since the climate in some endemic countries is similar to temperate climates observed in Europe, understanding the role of specific mosquito species in the transmission of JEV is essential for predicting and effectively controlling the potential for the introduction and establishment of JEV in Europe.MethodsThis study aimed to investigate the vector competence of colonized Culex pipiens biotype molestus mosquitoes for JEV. The mosquitoes were initially collected from the field in southern Sweden. The mosquitoes were offered a blood meal containing the Nakayama strain of JEV (genotype III), and infection rates, dissemination rates, and transmission rates were evaluated at 14, 21, and 28 days post-feeding.ResultsThe study revealed that colonized Swedish Cx. pipiens are susceptible to JEV infection, with a stable infection rate of around 10% at all timepoints. However, the virus was only detected in the legs of one mosquito at 21 days post-feeding, and no mosquito saliva contained JEV.Conclusions Overall, this research shows that Swedish Cx. pipiens can become infected with JEV, and emphasizes the importance of further understanding of the thresholds and barriers for JEV dissemination in mosquitoes.Graphical

Viral load suppression and its predictor among HIV seropositive people who receive enhanced adherence counseling at public health institutions in Bahir Dar, Northwest Ethiopia. Retrospective follow-up study.

For those HIV seropositive people with high viral loads, the World Health Organization recommends more counseling before changing ART regimens. A high viral load can lead to increased HIV transmission and lower survival rates. Clients with viral loads above 1000 copies/mL should receive enhanced adherence counseling for 3-6 months before switching. Despite enhanced adherence counseling programs, most countries struggle with viral load suppression. Little is known about viral load suppression in Ethiopia and the research area after counseling. This study aims to assess viral load suppression and its predictors among HIV-positive individuals receiving enhanced adherence counseling in Bahir Dar, Northwest Ethiopia, in 2022. An institution-based retrospective follow-up study was conducted among randomly selected 546 clients on Enhanced Adherence Counseling at public health facilities in Bahir Dar city. The Epicollect5 mobile application was used to collect the data, which was then exported to Stata version 14 for analysis. A Log-Binomial regression model was fitted for each explanatory variable. Variables having a p-value <0.25 in bivariate analysis were entered into a multivariable Log-Binomial regression model. Finally, an adjusted risk ratio with a 95% confidence interval and a p-value <0.05 was used to measure the strength of the prediction. Following enhanced adherence counseling, 312 (57.1%) people had their viral load suppressed. Absence of recurrent OI (ARR 1.40; CI 1.03-1.91), EAC stay less than 3 months (ARR 1.54; CI 1.19-1.99), EAC stay 3-6 months (ARR 1.38; CI 1.12-1.69), once-daily ARV dose regimen (ARR 1.28; CI 1.03-1.58), baseline viral load of 2879.00 copies/ml (ARR 1.30, CI 1.06-1.60), being orthodox Tewahido Christian (ARR 0.37; CI 0.18-0.75) were significant predictors of viral load suppression after Enhanced Adherence Counseling. Most importantly, this study found that most people had suppressed viral loads after receiving enhanced adherence counseling. Significant predictors of viral load suppression included recurrent OI, length of stay on EAC, daily ARV dosing regimen, baseline viral load, and religion. Clients with a high baseline viral load and those who experience recurring opportunistic infections should get extra care during EAC sessions.

Flip bifurcation analysis and mathematical modeling of cholera disease by taking control measures

To study the dynamical system, it is necessary to formulate the mathematical model to understand the dynamics of various diseases which are spread in the world wide. The objective of the research study is to assess the early diagnosis and treatment of cholera virus by implementing remedial methods with and without the use of drugs. A mathematical model is built with the hypothesis of strengthening the immune system, and a ABC operator is employed to turn the model into a fractional-order model. A newly developed system SEIBR, which is examined both qualitatively and quantitatively to determine its stable position as well as the verification of flip bifurcation has been made for developed system. The local stability of this model has been explored concerning limited observations, a fundamental aspect of epidemic models. We have derived the reproductive number using next generation method, denoted as “R0\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$R_{0}$$\\end{document}”, to analyze its impact rate across various sub-compartments, which serves as a critical determinant of its community-wide transmission rate. The sensitivity analysis has been verified according to its each parameters to identify that how much rate of change of parameters are sensitive. Atangana–Toufik scheme is employed to find the solution for the developed system using different fractional values which is advanced tool for reliable bounded solution. Also the error analysis has been made for developed scheme. Simulations have been made to see the real behavior and effects of cholera disease with early detection and treatment by implementing remedial methods without the use of drugs in the community. Also identify the real situation the spread of cholera disease after implementing remedial methods with and without the use of drugs. Such type of investigation will be useful to investigate the spread of virus as well as helpful in developing control strategies from our justified outcomes.

IMPACT OF 5G TECHNOLOGY ON SATELLITE COMMUNICATION: A PARADIGM SHIFT IN TELECOMMUNICATIONS WITH A FOCUS ON CYBERSECURITY CHALLENGES AND SOLUTIONS

This review investigates the transformative impact of 5G technology on satellite communication, with a particular focus on the cybersecurity challenges introduced by this integration. An analysis of 50 rigorously selected scholarly articles demonstrates that 5G significantly enhances satellite communication by improving data transmission rates, reducing latency, and increasing network efficiency, thereby facilitating extended coverage that bridges the digital divide by delivering high-speed internet to remote areas. Additionally, 5G supports the deployment of new applications such as enhanced Mobile Broadband (eMBB) and extensive Internet of Things (IoT) connectivity. However, this integration also introduces new cybersecurity challenges, such as increased vulnerability to cyber-attacks and the need for robust encryption methods to secure data transmissions. Technical issues like signal interference, regulatory hurdles involving spectrum sharing, and substantial economic investments for infrastructure development also pose significant challenges. These complexities require ongoing research and strategic planning to mitigate risks and fully harness the potential of 5G-enhanced satellite networks. The study highlights a paradigm shift in satellite communications, propelled by 5G's capabilities to create more inclusive, efficient, and secure global communication networks.

A bifunctional metamaterial with broadband properties of absorption and linear-to-linear polarization conversion

This paper proposes, measures, and investigates a bifunctional metamaterial capable of achieving absorption and reflective linear-to-linear polarization conversion simultaneously, which both exhibit the characteristics of broadband. The unit cell consists of a metal pattern with resistors, a dielectric plate, an air layer, and a metal backplate. The simulation results demonstrate that the designed metamaterial acquires over 90% absorption in the microwave band of 6.5–9.3 GHz. Within the frequency range of 12.7 GHz–17.2 GHz, the polarization conversion rate exceeds 90%, effectively converting y-polarized incident waves into x-polarized reflected waves. The experimental results align with the simulation data. The surface current and electric field distributions are utilized to analyze the absorption and polarization conversion phenomena. This bifunctional metamaterial exhibits potential application in radar imaging, enhancing data transmission rates, and wireless communication.

Laser-Based Mobile Visible Light Communication System

Mobile visible light communication (VLC) is key for integrating lighting and communication applications in the 6G era, yet there exists a notable gap in experimental research on mobile VLC. In this study, we introduce a mobile VLC system and investigate the impact of mobility speed on communication performance. Leveraging a laser-based light transmitter with a wide coverage, we enable a light fidelity (LiFi) system with a mobile receiving end. The system is capable of supporting distances from 1 m to 4 m without a lens and could maintain a transmission rate of 500 Mbps. The transmission is stable at distances of 1 m and 2 m, but an increase in distance and speed introduces interference to the system, leading to a rise in the Bit Error Rate (BER). The mobile VLC experimental system provides a viable solution to the issue of mobile access in the integration of lighting and communication applications, establishing a solid practical foundation for future research.

Levels of photoactivated phototropin modulate signal transmission during the chloroplast accumulation response.

Chloroplasts accumulate in regions of plant cells exposed to irradiation to maximize light reception for efficient photosynthesis. This response is mediated by the blue-light receptor phototropin. Upon the perception of blue light, phototropin is photoactivated, an unknown signal is transmitted from the photoactivated phototropin to distant chloroplasts, and the chloroplasts begin their directional movement. How activated phototropin initiates this signal transmission is unknown. Here, using the liverwort Marchantia polymorpha, we analysed whether increased photoactive phototropin levels mediate signal transmission and chloroplast behaviour during the accumulation response. The signal transmission rate was higher in transgenic cells overexpressing phototropin than in wild-type cells. However, the chloroplast directional movement was similar between wild-type and transgenic cells. Consistent with the observation, increasing the amount of photoactivated phototropin through higher blue-light intensity also accelerated signal transmission but did not affect chloroplast behaviour in wild-type cells. Photoactivation of phototropin under weak blue-light led to the greater protein level of phosphorylated phototropin in cells overexpressing phototropin than in wild-type cells, whereas the autophosphorylation level within each phototropin molecule was similar. These results indicate that the abundance of photoactivated phototropin modulates the signal transmission rate to distant chloroplasts but does not affect chloroplast behaviour during the accumulation response.

Computational Evaluation of the Structural, Topological, and Solvent Effects on the Nonlinear Optical Properties of 1-Methylurea Butanedioic Acid Crystal

In silico investigation of the effects of a molecule’s framework and surroundings on its nonlinear optical (NLO) response is still an active topic of study in the fields of photonics and optoelectronics. NLO materials play a crucial role in modern photonics and optoelectronic technologies. Presented here is a comprehensive theoretical analysis of the structural, topological, and NLO features of 1-methylurea butanedioic acid (MUBA) alongside solvent effects (water, DMSO, and benzene) using the DFT method at the B3LYP(D4)/6–311++G(d,p) level. Geometric and infrared parameters were calculated and compared with experimental values. The analysis using atoms in molecules (AIM) and the independent gradient model (IGM) reveals the presence of two noncovalent intermolecular interactions: N4–H16⋯O12 and O6–H25⋯O3, which stabilize the crystal structure. The natural bond orbital (NBO) analysis reveals that the LP(1)N4 ⟶ π∗(C2-O3) interaction is the most stabilizing and is enhanced in solvent environments. NLO data show that the first (βtot) and second (γ) hyperpolarizability values of MUBA are approximately 0.6–1.1 and 8.3–17.0 times higher than those of urea. In addition, the quadratic and cubic responses of MUBA are significantly reduced and increased, respectively, in solvent environments. Based on its NLO susceptibilities, MUBA exhibits SHG, EOPE, OKE, and EFISHG properties, suggesting its potential application in the production of optoelectronic devices and optical limiting. This study enhances our understanding of the factors influencing the NLO behaviour of organic crystals, providing valuable insights for designing materials with enhanced NLO characteristics. The implications extend to industries such as telecommunications and computing, where faster data transmission rates are in high demand.

PEG-crosslinked O-carboxymethyl chitosan films with degradability and antibacterial activity for food packaging

This study developed a kind of PEG-crosslinked O-carboxymethyl chitosan (O-CMC–PEG) with various PEG content for food packaging. The crosslinking agent of isocyanate-terminated PEG was firstly synthesized by a simple condensation reaction between PEG and excess diisocyanate, then the crosslink between O-carboxymethyl chitosan (O-CMC) and crosslinking agent occurred under mild conditions to produce O-CMC–PEG with a crosslinked structure linked by urea bonds. FT-IR and 1H NMR techniques were utilized to confirm the chemical structures of the crosslinking agent and O-CMC–PEGs. Extensive research was conducted to investigate the impact of the PEG content (or crosslinking degree) on the physicochemical characteristics of the casted O-CMC–PEG films. The results illuminated that crosslinking and components compatibility could improve their tensile features and water vapor barrier performance, while high PEG content played the inverse effects due to the microphase separation between PEG and O-CMC segments. The in vitro degradation rate and water sensitivity primarily depended on the crosslinking degree in comparison with the PEG content. Furthermore, caused by the remaining –NH2 groups of O-CMC, the films demonstrated antibacterial activity against Escherichia coli and Staphylococcus aureus. When the PEG content was 6% (medium crosslinking degree), the prepared O-CMC–PEG−6% film possessed optimal tensile features, high water resistance, appropriate degradation rate, low water vapor transmission rate and fine broad-spectrum antibacterial capacity, manifesting a great potential for application in food packaging to extend the shelf life.

Evaluating bag storage technologies for physical characteristics, loss reduction and economic viability in pulses

Meticulous selection of storage bags is vital to optimize grain preservation, mitigate losses, and improve rural income. A comprehensive comparative evaluation of four different commercial pulse storage bag technologies (Jute bag, Woven polypropylene bag (WPP), Purdue Improved crop storage bag (PICS), and Grainpro bag) was conducted alongside novel polypropylene reinforced Jute storage bag (PPRJ). The storage bags were examined for their physical properties (unit weight, coefficient of friction, breaking strength), water vapour transmission rate (WVTR), and effectiveness in preserving pulse (Bengal gram (Cicer arietinum, Var. Swetha ICCV -2)) quality and quantity during storage. Unit weight was highest for jute bags (0.14 ± 0.080 g/cm2), which reduced by 35.9 % after reinforcement with polypropylene, and lowest for Grainpro bags (0.03 ± 0.002 g/cm2). Jute bag exhibited the highest breaking strength (181.0 ± 1.06 kgf), which decreased by 23.7 % after reinforcement. Synthetic fiber bags had lower breaking strength and coefficient of friction, limiting their stacking ability. WVTR of the jute bag reduced by 39.2 % after reinforcement. The PICS bag offered the highest protection to stored Bengal gram. Weight loss was more than 25% and 10% of the initial grain weight in Jute and WPP, respectively, due to inefficient barrier properties, whereas the PPRJ bag was similarly effective as hermetic bags. The benefit-cost ratio ranged between 0.219 and 0.297 for the three profit-yielding bags (PICS, Grainpro, and PPRJ). Polypropylene-reinforced jute bags represent a promising advancement in sustainable grain storage practices. The significance of establishing hermetic conditions to suppress insect populations and safeguard grain quality was reaffirmed in the study.

Key technologies of smart antenna in WLAN based on adaptive array

In order to improve the communication quality and transmission rate of WLAN, the key technologies of smart antenna in WLAN based on adaptive array are proposed. The adaptive array is used to suppress the WLAN interference signal, and the feedback from the output is used to adjust the weight loaded on the signal, and the optimal weight corresponding to the linear constraint minimum variance is obtained to achieve beamforming optimization. On this basis, the optimal antenna selection algorithm and the sub-optimal antenna selection algorithm are designed, and the sub-channel matrix with the maximum capacity can be obtained by repeated iterative calculation, so as to realize the smart antenna selection and further optimize the performance of WLAN. Experimental results show that the smart antenna signal has 100% coverage in WLAN compared with conventional methods. When the transmission rate is greater than 35 mb/s, the delay of the study method is not jitter compared to the contrast method. When the transmission rate is greater than 35 mb/s, the packet loss rate of the proposed method remains stable, while the packet loss rate of the two comparison methods begins to increase. When the transmission rate is greater than 12 mb/s, the throughput of the proposed method is more stable than the other methods. In conclusion, this method has the characteristics of large signal coverage, low delay, low packet loss rate and high throughput, and can be widely used in practice. The contribution of this study is that the weight of the antenna array can be dynamically adjusted through the adaptive algorithm, thus optimizing the quality of the received signal and improving the receiving sensitivity.

Preparation and Characterization of Amoxicillin-Loaded Polyvinyl Alcohol/Sodium Alginate Nanofibrous Mat: Drug Release Properties, Antibacterial Activity, and Cytotoxicity

AbstractThis study aimed to prepare a polyvinyl alcohol/sodium alginate (PVSA) nanofibrous mat as an amoxicillin (AMOX) delivery system. AMOX was loaded to the PVSA nanofibers during electrospinning, and the AMOX-loaded PVSA (PVSA/AMOX) nanofibrous mat was cross-linked by glutaraldehyde (GA). The PVSA/AMOX nanofibrous mat was characterized by Fourier Transform infrared spectroscopy, scanning electron microscopy, Brunauer–Emmett–Teller, and mercury porosimetry analyses. The thickness, air permeability, and water vapor transmission rate of the PVSA/AMOX nanofibrous mat were 0.43 ± 0.08 mm, 17.2 ± 4.91 L/m2/s, and 1485 ± 13.6 g/m2/d, respectively, which were suitable for wound dressing applications. The tensile strength was 6.73 ± 0.48 MPa and elongation at a maximum load was 81.9 ± 17.0%, within the ranges of human skin’s values. The total porosity was 59.4%, enabling cell adhesion, migration, and proliferation. The PVSA/AMOX nanofibrous mat has high swelling (319 ± 4.2%) and low degradation (2.2 ± 0.1% in 10 days) ratios. The nanofibrous mat cross-linked with 0.25% GA solution for 20 min had a 73.07% cumulative release for 90 min. The drug release kinetics were obeyed to the Korsmeyer-Peppas model. The nanofibrous mat presented antibacterial activity on S. aureus ATCC 29213 and E. coli ATCC 25922, and there was no cytotoxic effect on the human normal keratinocyte cells, demonstrating the potential for use in wound dressing applications.

Exploring FSO link performance in varied atmospheric conditions to optimize 5G communication with a polarized quasi-diffuse transmitter

Abstract Free space optical (FSO) communication is an innovative technology that holds immense promise for numerous applications thanks to its high data transmission rates, rapid scalability, cost-effectiveness, superior security, and comprehensive capacity access techniques for Gbps data transmission. FSO communication relies on the Earth’s atmosphere as the medium, which introduces atmospheric disturbances that have driven the development of spatial diversity techniques aimed at enhancing the technology’s performance. Our proposed system employs a polarized quasi-diffused system with a fork as a spatial diversity scheme, which eliminates the need for multiple transmitters. We have developed a model that integrates both simulation designs to achieve optimal results. The proposed model has demonstrated excellent performance under various atmospheric turbulences, including rain, fog, and haze, exhibiting a very high maximum quality factor, improved received power, and better bit error rate (BER). Finally, we have obtained, analyzed, and extensively discussed the simulation results to provide a comprehensive understanding of the proposed model’s potential benefits. Our simulations show a maximum quality factor of 23 compared to existing models in much better, a 34 % increase in received power, and a 31 % decrease in BER compared to existing models. These results highlight the potential benefits of the proposed model for FSO communication systems.

Genomic characterization of Influenza A (H1N1)pdm09 and SARS-CoV-2 from Influenza Like Illness (ILI) and Severe Acute Respiratory Illness (SARI) cases reported between July–December, 2022

Influenza Like Illness (ILI) and Severe Acute Respiratory Infection (SARI) cases are more prone to Influenza and SARS-CoV-2 infection. Accordingly, we genetically characterized Influenza and SARS-CoV-2 in 633 ILI and SARI cases by rRT-PCR and WGS. ILI and SARI cases showed H1N1pdm09 prevalence of 20.9% and 23.2% respectively. 135 (21.3%) H1N1pdm09 and 23 (3.6%) H3N2 and 5 coinfection (0.78%) of H1N1pdm09 and SARS-CoV-2 were detected. Phylogenetic analysis revealed H1N1pdm09 resemblance to clade 6B.1A.5a.2 and their genetic relatedness to InfA/Perth/34/2020, InfA/Victoria/88/2020 and InfA/Victoria/2570/2019. Pan 24 HA and 26 NA nonsynonymous mutations and novel HA (G6D, Y7F, Y78H, P212L, G339R, T508K and S523T) and NA (S229A) mutations were observed. S74R, N129D, N156K, S162N, K163Q and S164T alter HA Cb and Sa antibody recognizing site. Similarly, M19T, V13T substitution and multiple mutations in transmembrane and NA head domain drive antigenic drift. SARS-CoV-2 strains genetically characterized to Omicron BA.2.75 lineage containing thirty nonsynonymous spike mutations exhibited enhanced virulence and transmission rates. Coinfection although detected very minimal, the mutational changes in H1N1pdm09 and SARS-CoV-2 virus infected individuals could alter antibody receptor binding sites, allowing the viruses to escape immune response resulting in better adaptability and transmission. Thus continuous genomic surveillance is required to tackle any future outbreak.

Remote monitoring of cardiac implantable electronic devices using smart device interface versus radiofrequency‐based interface: A systematic review

AbstractBackgroundGuidelines recommended remote monitoring (RM) in managing patients with Cardiac Implantable Electronic Devices. In recent years, smart device (phone or tablet) monitoring‐based RM (SM‐RM) was introduced. This study aims to systematically review SM‐RM versus bedside monitor RM (BM‐RM) using radiofrequency in terms of compliance, connectivity, and episode transmission time.MethodsWe conducted a systematic review, searching three international databases from inception until July 2023 for studies comparing SM‐RM (intervention group) versus BM‐RM (control group).ResultsTwo matched studies (21 978 patients) were retrieved (SM‐RM arm: 9642 patients, BM‐RM arm: 12 336 patients). There is significantly higher compliance among SM‐RM patients compared with BM‐RM patients in both pacemaker and defibrillator patients. Manyam et al. found that more SM‐RM patients than BM‐RM patients transmitted at least once (98.1% vs. 94.3%, p &lt; .001), and Tarakji et al. showed that SM‐RM patients have higher success rates of scheduled transmissions than traditional BM‐RM methods (SM‐RM: 94.6%, pacemaker manual: 56.3%, pacemaker wireless: 77.0%, defibrillator wireless: 87.1%). There were higher enrolment rates, completed scheduled and patient‐initiated transmissions, shorter episode transmission time, and higher connectivity among SM‐RM patients compared to BM‐RM patients. Younger patients (aged &lt;75) had more patient‐initiated transmissions, and a higher proportion had ≥10 transmissions compared with older patients (aged ≥75) in both SM‐RM and BM‐RM groups.ConclusionSM‐RM is a step in the right direction, with good compliance, connectivity, and shorter episode transmission time, empowering patients to be in control of their health. Further research on cost‐effectiveness and long‐term clinical outcomes can be carried out.

Global Stability of SIR Model with Heterogeneous Transmission Rate Modeled by the Preisach Operator

Global Stability of SIR Model with Heterogeneous Transmission Rate Modeled by the Preisach Operator

Fabrication of chitosan-based smart film by the O/W emulsion containing curcumin for monitoring pork freshness

In this research, curcumin (Cur) was encapsulated in succinylated soy protein isolate (SSPI) emulsion and combined with chitosan (CS) to prepare a smart film. The good adsorption ability of SSPI at the oil-water interface provides good physical stability for preparing Cur-loaded emulsion. These CS smart films containing SSPI emulsions with different curcumin content were evaluated on the structure, mechanical, barrier, antioxidant, antibacterial properties, and controlled release behavior. SEM and FT-IR results showed that the Cur-loaded emulsion was compatible with the CS matrix. By adding the emulsion, the film blocked 97.11% of ultraviolet radiation, reduced the water vapor transmission rate by 42%, and improved the swelling degree (32.26%), water solubility (12%), thermal stability and elongation at break (70.79 %) (p < 0.05). In addition, the film has a high antibacterial effect on Staphylococcus aureus and Escherichia coli (Bacterial inhibition zone diameter: 19.59 mm and 18.66 mm) and the release rate of curcumin in the film reaches 82.60%, mainly following the Fickian diffusion. The film gradually turns red under alkaline conditions, a property that makes the films successful in monitoring the deterioration of pork during storage. Adding SSPI emulsions and curcumin to films has great potential for food freshness monitoring and packaging.

Evaluating the mosquito vector range for two orthobunyaviruses: Oya virus and Ebinur Lake virus

BackgroundMosquito-borne viruses cause various infectious diseases in humans and animals. Oya virus (OYAV) and Ebinur Lake virus (EBIV), belonging to the genus Orthobunyavirus within the family Peribunyaviridae, are recognized as neglected viruses with the potential to pose threats to animal or public health. The evaluation of vector competence is essential for predicting the arbovirus transmission risk.MethodsTo investigate the range of mosquito vectors for OYAV (strain SZC50) and EBIV (strain Cu20-XJ), the susceptibility of four mosquito species (Culex pipiens pallens, Cx. quinquefasciatus, Aedes albopictus, and Ae. aegypti) was measured through artificial oral infection. Then, mosquito species with a high infection rate (IR) were chosen to further evaluate the dissemination rate (DR), transmission rate (TR), and transmission efficiency. The viral RNA in each mosquito sample was determined by RT-qPCR.ResultsThe results revealed that for OYAV, Cx. pipiens pallens had the highest IR (up to 40.0%) among the four species, but the DR and TR were 4.8% and 0.0%, respectively. For EBIV, Cx. pipiens pallens and Cx. quinquefasciatus had higher IR compared to Ae. albopictus (1.7%). However, the EBIV RNA and infectious virus were detected in Cx. pipiens pallens, with a TR of up to 15.4% and a transmission efficiency of 3.3%.ConclusionsThe findings indicate that Cx. pipiens pallens was susceptible to OYAV but had an extremely low risk of transmitting the virus. Culex pipiens pallens and Cx. quinquefasciatus were susceptible to EBIV, and Cx. pipiens pallens had a higher transmission risk to EBIV than Cx. quinquefasciatus.Graphical

Seroprevalence of Herpes Simplex Virus Types 1 and 2 among Pregnant Women in South-Western Romania

Background: Pregnancy-related infections with the human herpes simplex virus (HSV) strains HSV-1 and HSV-2 are particularly noteworthy. There are numerous reported examples of intrapartum transmission of herpes infection, notwithstanding the extreme rarity of intrauterine transfer from mother to fetus. The purpose of this study was to evaluate the seroprevalence of HSV-1 and HSV-2 antibodies in pregnant women in the western region of Romania. Methods: Pregnant women who presented for routine pregnancy monitoring at Romania’s County Clinical Emergency Hospital in Craiova between 2013 and 2016 and 2019 and 2022 were included in the study. In order to find anti-HSV-1/2 IgG antibodies, we conducted serological testing on the patients and gathered demographic information from them. Results: HSV-1 seroprevalence was shown to have declined in rural areas and increased in urban areas, with values between 2013 and 2016 being 89.30% and those between 2019 and 2022 being 84.96%, respectively. Women over 35 who were pregnant had the highest seroprevalence. The seroprevalence of HSV-2 decreased from 16.16% in 2013–2016 to 12.43% in 2019–2022, and both rural and urban areas continued to experience this declining trend. Similarly, pregnant women over 35 years old had the highest frequency of HSV-1 infections. Conclusions: Establishing educational programs and other actions to reduce the transmission rate and ultimately the prevalence of the disease can be made easier with knowledge about the seroprevalence of HSV-1 and HSV-2 infections.

Application of STBC in MIMO-OFDM Broadband Wireless Communications

The Space Time Block Coding (STBC) is applied in multiple transmit antennas using data transfer for fading channels. After being encoded, the data is broken into n streams of continuously broadcast strings over n transmit antennas using STBC. The received signal is the combination of n broadcast signals and it becomes erroneous due to the entry of noise at receiver end. The probabilistic decoding approach is applied instead of joint detection approach for recovering data via decoupling of signals delivered from various antennas. The maximum likelihood decoding scheme employs the orthogonal structure of STBC called as OSTBC (Orthogonal Space Time Block Code) for providing the maximum likelihood decoding algorithm depending upon linear computation at receiver. In the present work, a MATLAB/SIMULINK environment of OSTBC has been used in order to acquire the highest dimension of variability for specific number of broadcasts as well as receive antennas utilizing a simple decoding techniques. With or without Grey Coding, OSTBC / STBC is used in MATLAB / SIMULINK blocs. The OSTBC algorithm calculates the highest achievable transmission rate for every amount of transmit antennas in any constellations including M-PSK array. M-PSK STBCs are used for different complex constellations to achieve ½ as well as ¾ of highest allowable transmission rate for Multiple Input Multiple Output (MIMO) transmit antennas utilizing various constellations